BDS Suspension has the new Susensions\Liftkits for the 2011 Ford 3/4 Ton!
Don't forget that once you receive your shipment, give us a call or email (
contact page) to schedule your installation.
Specs:
Max Tire Size: 35 x 12.50
Max Wheel Size: 17 x 9
Back Spacing: 4in.
est. Install: 8 hours
Difficulty Level: 3
4in. FORD F250, F350 4WD STD KIT (Front 4in. Standard System R: 3in Block Kit)
Price: $1135.00*
(add to cart to see our discounted\final price)
Shipping: $0.00 (free)
Compatible Vehicles:
2011 - 2011 Chevy Silverado 2500HD 4WD Diesel
2011 - 2011 Chevy Silverado 2500HD 4WD Gas
2011 - 2011 GMC Sierra 2500HD 4WD Diesel
2011 - 2011 GMC Sierra 2500HD 4WD Gas
Features:
This kit centered around two Pro-Ride coil springs. The box kit includes two new radius arm drop brackets to put the stock radius arm back at factory angle which will maintain your stock driving characteristics.
The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.
The rear is lifted via a 5in. block kit that eliminates the factory block.
Notes:
These trucks were manufactured with and without top mounted overload springs on the rear leaf springs.
A top mounted overload is an extra leaf separate from the pack that set above the main leaf.
You will need to identify which you have before ordering.
Front exhaust modification may be required to clear front drive shaft.
Removal of factory block is required. The net rear lift height will vary depending on height of factory block.
If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
Max Tire Size: 37in. x 12.50Max Wheel Size: 20 x 9Back Spacing: 5in. to 6in.est. Install: 8-10 hoursDifficulty Level: 4
6in. FORD F250, F350 4WD STD KIT(F: 6in. Std System R: 6in. Leaf Spring)
Price: $2099.99*
(add to cart to see our discounted\final price)
Shipping: $0.00 (free)
Compatible Vehicles:
2011 - 2011 Ford F250 Super Duty 4WD Diesel
2011 - 2011 Ford F350 Super Duty 4WD Diesel
Features:
This kit centered around two Pro-Ride coil springs. The box kit includes two new radius arm drop brackets to put the stock radius arm back at factory angle which will maintain your stock driving characteristics.
The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.
The rear is lifted via new Glide-Ride leaf springs.
Notes:
These trucks were manufactured with either a 2in. factory rear block or a 3-1/2in. block. You must verify which factory block you have before ordering.
Front exhaust modification may be required to clear front drive shaft. Removal of factory block is required. The net rear lift height will vary depending on height of factory block.
If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
Although extremely rare, front driveline vibration may occur.
